Usefull Info

The scope of our company - an external tuning, and in particular - aerodynamic, so in this article we want to briefly tell visitors what is a «Tuning parts».

Aerodynamic parts has two important functions:

-Giving the appearance of an image of the vehicle through which the iron horse will be allocated
   from the gray mass on the road.
-Improving the aerodynamic properties of the car.

     The essence of the first function is obvious: the car in the tuning parts is respected. Aggressiveness, sportiness, completeness «silhouette» body - the reasons for the passing, passing, passing by, people will turn round, get phone and camera and take pictures to show friends and then iron handsome ...

the direction of oncoming air at the second function we will just details. To get started, explaining that such an aerodynamics. This is science, whose task is to determine the forces acting on the streamlined body of gas, the distribution of pressure at the surface velocities in a gas, it circumfluent. For motorists, this research is important because at the speeds that reach the cars, the impact of counter-flow of air over substantially, and the simplest forms of smoothing is not necessary.
     In practice, the following occurs: at speeds in excess of 140-150 km / h the car literally «punch» column of air, leaving behind a turbulent zone (with a random stream of air swirl). There is a situation where a car «take off»: the flow of air turn it on all sides. Under the head and in the engine compartment they create excess pressure. On the back of the bevel edge of the body formed strong vortices, which further reduce the static pressure. As a result, pressure is reduced the force, and as a result, deteriorating controllability.
This is just to deal with these effects and have been established aerodynamic tuning part.

     The kit usually consists of parts front / rear bumper (or lips), side sills (or skirts), as well as spoiler

     The purpose of the front bumper (the lips) to redirect the greatest possible part of the counter-flow up or in a special air ducts (for example, for brake discs). The purpose of skirts - to reduce the vorticity of lateral air flows that fall under the head. Rear bumper least functional, and is essentially a purely decorative nature. Spoiler same is «disrupt» air flow that helps to avoid the eddies behind the car by more than a smooth «closure» corridor.
Thus, the pressure under the car falls, the pressure force increases and the car literally «vtseplyaetsya» in road.

     So, we are told that the aerodynamic parts and why they are needed. Now we'll talk about the materials from which they are made. There is already one decides for himself that he needs: weight, durability and low cost. Our company offers an external tuning of the three materials: fiberglass, polyurethane and carbon. Each material has its pluses and minuses, which we give below:

Fiberglass

Pluses:

     * Low price
     * The quality is not far behind polyurethanes
     * Lightweight material
     * After the bumps are not taking the original form, as well as easy to repair

Disadvantages:

     * Bad Reputation (low quality, with non-technology production)
     * The material is toxic (observe safety when working with it: use a respirator)

Polyurethane (foam and rubber can be)

Advantages of Polyurethane:

     * Rubberized polyurethane (PP) is the highest grade on all important levels of quality. Shock top. The presence of rubber in the composition of the material also makes it very flexible. Treated without destroying arbitrarily strong deformation followed by maintaining the initial shape. When you swipe the product of the rubberized material could only fly down to the anchorage, but not break.
     * Polyurethane foam (PT) on the practicality of a second after the rubberized. The material has high impact strength, the probability of destruction of the direct impact is very small. Although the material could still collapse, any kind of breaks and other direct deformation, because no such flexibility at the twist of rubberized version. But to him as the deformation, needed technical tools or heavy blows on the road facility.

Disadvantages:

     * The high price
     * Usually heavier fiberglass

Carbon

carbon fiber Pluses:

     * Strength (made from carbon, Kevlar, fiberglass and resin epoksitnoy)
     * Ease of (fiberglass is easier, as well as 40% more steel and 20% - Aluminum)

Disadvantages:

     * Very high price
     * There is very little elongation, ie not stretched (fragile and afraid to point strikes)